FD-600全液压动力头反循环连续取样钻机研制与应用     

刘智荣  伍晓龙  王庆晓 《探矿工程》2018,45(3):62-67

文章结合国内外CSR取心技术的现状和所生产钻机的特点,为满足国内对空气反循环连续取样（心）、冲击回转、定向钻进等多种高效钻探工艺对钻机的需要,从钻机整体结构设计、整体布局进行详细考量,采用质量可靠的液压件、动力机等外购件,摒弃传统钻机设计周期长、动力小、机械化程度低、对地形和钻探工艺适应性低等特点,研制出了一台高效、可靠、机械化程度较高的FD-600型全液压动力头式反循环取样钻机。在3次野外生产试验中充分体现出了优越性,可满足砂金勘探、工程施工等取心钻探的要求。  相似文献   

Occurrence and Chemical Compositions of Amphiboles in Altered Dioritic Rocks of Laiwu Skarn‐Type Iron Deposit in West Shandong Area,China     

《Resource Geology》2018,68(4):425-445

The Laiwu Fe deposit is the largest skarn‐type deposit in West Shandong in China, with an estimated reserve of 290 Mt of iron ore. Here, we investigate the occurrence and chemical composition of amphiboles in altered dioritic rocks of this deposit. Three generations of amphibole group minerals were identified in these rocks. The first type (Type 1) is a hornblende with a generally euhedral crystal shape, 150–500 μm in size, and dominantly occurs in the host monzonite. The second type (Type 2) of hornblende occurs as fine grains (<100 μm) or concentric rims, less than 50 μm in thickness, around the Type 1 hornblende. The third type (Type 3) of amphibole is anhedral actinolite occurring along the boundary or the cracks of the Type 1 or 2 hornblende grains. The Type 1 hornblende has higher FeO (12.5–15.6 wt.%) and lower MgO contents (11.2–14.6 wt.%) than the Type 2 hornblende, which has an FeO content ranging from 8.8 to 10.5 wt.% and MgO content ranging from 14.2 to 17.1 wt.%. The Type 3 actinolite shows the lowest FeO (4.6–6.4 wt.%) and highest MgO (19.8–21.2 wt.%) contents. We infer that the Type 2 hornblende formed from Fe‐rich hydrothermal fluids released during rapid upwelling of the crystallizing magma. The fluids were relatively reduced and enriched in Fe. The Type 3 actinolite formed by coupled dissolution and reprecipitation, and its formation is one of the features denoting Fe‐enrichment events. Our study of these types of amphibole provides insights into the ore formation process.  相似文献   

Rainfall flood hazard at nuclear power plants in India     

Pramod Kumar Sharma 《Georisk: Assessment and Management of Risk for Engineered Systems and Geohazards》2018,12(3):218-233

Flood hazard evaluation is an important input for Nuclear Power Plants external events safety studies. In the present study, flood hazard at various nuclear sites in India due to rainfall has been evaluated. Hazard estimation is a statistical procedure by which rainfall intensity versus occurrence frequency is estimated from historical records of rainfall data and extrapolated with asymptotic extreme value distribution. Rainfall data needed for flood hazard assessment are daily annual maximum rainfall (24?h data). The observed data points have been fitted using Gumbel, power law and exponential distribution, and return period has been estimated. To study the stationarity of rainfall data, a moving window estimate of the parameters has been performed. The rainfall pattern is stationary in both coastal and inland regions over the period of observation. The coastal regions show intense rainfall and higher variability than inland regions. Based on the plant layout, catchment area and drainage capacity, the prototype fast breeder reactor (PFBR) site is unlikely to be flooded.  相似文献   

长江三角洲北岸土体工程地质层组划分及其应用   总被引：1，自引：0，他引：1  

苟富刚  龚绪龙  梅芹芹 《地质论评》2018,64(1):237-245

鉴于研究区工程地质层划分标准尚不统一,不利于工程地质资料的交流和资料的社会化利用。为提高研究区工程地质资料的通用性,结合研究区11个1∶50000标准图幅工程地质调查工作,以100m以浅的土体为工程地质层组划分对象,考虑沉积时代、沉积环境、土体结构特征和物理力学参数,建立研究区基本地层结构层序和编码,将研究区土体划分为7个工程地质层组和21个工程地质层。通过工程地质层组的建立,找出了大区域工程钻孔土层的对应关系,使区域地层资料对比分析成为可能,有助于地质模型的概化和抓住工程地质问题。采用物理力学参数离散性、绘制的地质剖面和三维型分析了工程地质层组划分的合理性,证实了层组划分结果合理正确。通过工程地质层组划分,找出了2个软弱敏感层和4个优势持力层。本文的成果对长江北岸三角洲地区的工程勘察、城市规划和建设项目选址论证具有一定的指导意义。  相似文献   

准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例          下载免费PDF全文

于春勇郭小文  任战利任文波 杨桂林 《地质科学》2018,(1):207-220

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。  相似文献   

全球2℃温升碳约束下中国煤电搁浅资产研究     

张为荣  袁家海 《气候变化研究进展》2021,17(1):36-44

作为全球煤电装机规模最大且仍在扩张的国家,中国需要慎重评估兑现《巴黎协定》温室气体减排承诺带来的潜在煤电资产搁浅问题。研究运用“上下交互”的碳锁定曲线模型,识别不同产能扩张情景下（无新增、新增200、300和400 GW）的搁浅煤电机组。首先,从“自上而下”角度匡算中国煤电行业2℃温升目标下的碳配额。然后,从“自下而上”角度,根据高精度的燃煤电站信息核算煤电累积CO₂排放量。最后基于“上下交互”模式筛选出搁浅燃煤电站,在此基础上运用现金流量法估算其潜在的搁浅价值,并对其关键因素进行敏感性分析。结果表明,在无新增情景下,煤电搁浅资产规模约为0.38万亿元;若继续增加200~400 GW煤电装机,则搁浅价值将较无新增情景增加3.7~8.2倍。因此,建议“十四五”期间应树立煤电规模峰值意识,严控煤电新增产能,避免错过最佳减排时机。  相似文献   

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data     

Milad Janalipour 《International Journal of Digital Earth》2018,11(12):1241-1268

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.  相似文献   

准噶尔盆地南缘白垩系—古近系烃源岩地球化学特征及潜力评价     

高剑雄 《地质论评》2021,67(Z1):67z1219-67z1221

  相似文献   

复合动力钻进工艺在干热岩钻井中的应用研究          下载免费PDF全文

谭现锋  马哲民  段隆臣  刘肖  李颖  郭明义 《探矿工程》2021,48(7):1-8

2011年山东省地矿局在山东省利津县实施了国内第一个干热岩调查评价项目,采用转盘回转钻进,但钻效低、能耗高。为提高在高温硬岩条件下的钻进效率、缩短钻井周期、降低生产成本,2015年在福建省漳州市实施的中国地质调查局东南沿海深部地热HDR-1干热岩科学钻探工程井（井深4000.86 m,孔底温度109 ℃）和2017年在青海省共和县完成的GR1干热岩科学勘探井（井深3705 m,孔底温度236 ℃）,在施工中均探索使用了“转盘+螺杆钻具”复合钻进工艺,并在高温取心段首次测试应用了“转盘+涡轮钻具”复合取心钻进工艺,取得了良好的效果并就下一步研究方向提出了意见和建议,为螺杆钻具和涡轮钻具的深入研究提供了宝贵的高温施工经验,也将为我国干热岩科学钻探与深部地热资源勘探提供新的技术支撑。  相似文献   

成层软土地基预固结处理后桩基水平承载力估算方法     

黄朝煊  袁文喜  胡国杰 《岩土力学》2021,(1):113-124,134

目前通过对软土地基预加固处理来提高桩基水平承载力已被工程界认可,但如何在工程前期设计过程中估算软土地基预处理后桩基水平承载力提高值仍是技术难点。基于此,参考Bowles[1]的地基土水平抗力计算式,同时考虑成层软土地基预排水固结处理影响,通过数学推导,推求出根据原状软土室内土工试验抗剪强度指标及预加固处理时间,估算软土地基预处理后桩基水平承载力提高值的实用计算方法。考虑桩侧土弹塑性屈服影响,推导出成层软土中水平受荷桩弹塑性解析解及塑性区深度的计算式,给出了桩顶水平位移、桩身最大弯矩的无量纲计算式及相关计算源代码。依托于浙江省某水闸桩基工程案例,根据提出的计算方法对桩基水平承载力、桩顶水平位移及桩身最大弯矩等性状进行预估计算,并与地基预处理前、后现场试桩检测值进行验证对比,认为桩基水平承载力、桩顶水平位移及桩身最大弯矩等预估计算成果与工程现场试桩的检测值较接近,对类似工程设计具有较好的参考价值。  相似文献